BendPak HD-7500PBX Vehicle & Boat Storage Lift 144" Rise

BendPak HD-7500PBX Vehicle & Boat Storage Lift 144" Rise
7,500 lbs. Capacity Extended Height Multi-Level Locking Positions

Why do we need a boat lift or trailer lift? Because the typical car or truck lift is just not built to be wide enough to accommodate a boat or trailer. Boat and utility trailers typically are just too wide to fit on a standard auto lift. So until now, boat owners had no alternative. Avoid rust, blemishes, rot, cold damage and more with BendPak's HD-7500 Series boat storage solutions. These are the most cost-effective and safest ways to dry dock your boat. BendPak is always in front with innovation and quality. BendPak manufactures some of the most technically advanced automobile lifts in the industry.

The BendPak HD-7500PBX Vehicle & Boat Storage Lift with 144" Rise is the perfect high-rise dry-docking solution. Keep your boat in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-7500PBX pulls double-duty as a professional-grade car lift for vehicles.

THE PERFECT BOAT STORAGE LIFT

Never trust your precious boat to the unpredictability of the water, nor should you pay for dry docks and/or yard storage. Salt water corrosion, barnacles, rust damage, rub marks, coating blemishes, rot and cold weather can do irreversible harm caused to your boat's engine and interior. The longer you go without a boat storage lift, the more you leave yourself open to catastrophe. BendPak has the perfect solution: Keep your boat up in the air and out of the water. Because it features adjustable runways that accommodate cars and trucks, the HD-7500 Series pulls double-duty as a professional-grade car lift for vehicles.

NO MORE DOCKING FEES A boat lift is a great way to shield yourself from monthly boat storage fees. The larger the boat, the bigger the bill, so there's no better way to keep your boat safe than to store it in your own garage.

FITS MOST BOAT TRAILERS
Wide and narrow installations help accommodate virtually all boat trailer types.

The Ultimate Dry-Docking Solution
You shouldn't have to put up with ridiculous dry-docking fees, nor should you put your boat's fate in the hands of unpredictable water. Saltwater corrosion, barnacles, rust damage, and coating blemishes are just a handful of ways that your prized boat could end up receiving irreversible damage. Bottom line is if you want to truly sleep soundly and not worry about your boat, you're going to want to invest in a boat lift. That's where BendPak comes in. Keep your boat up in the air and out of the water with the HD-7500 Series. The HD-7500 Series has been crafted to meet the same level of quality you'd expect from any of our automotive lifts, meaning your lift is exceptionally safe.

BendPak Designed And Engineered
A BendPak boat lift is crafted to the same strict specifications as our automotive lifts, so you know that your boat is exceptionally safe.

No More Docking Fees
A boat lift is a great way to shield yourself from monthly boat storage fees. The larger the boat, the bigger the bill, so there's no better way to keep your boat safe than to store it in your own garage.

Great For Business Owners
Boat storage business owners will also benefit from BendPak boat lifts. They understand better than anyone that more storage can help the business earn a bigger bottom line. Offer your customers the safest boat storage solutions; it's one of the best business decisions you'll ever make.

Fits Most Boat Trailers
Wide and narrow installations help accommodate virtually all boat trailer types.

Dependable Design
Four heavy-duty, stainless steel wire ropes and a single hydraulic cylinder mounted underneath the runway make this lift one of the most durable, maintenance-free models on the market.

Dual-Hub Wire Rope Sheaves
Reduce stress and fatigue on the axles, sheaves and cables. We insist on using dual-hub sheaves where appropriate, even if they cost us more to make.

Multi-Level Locking Positions
BendPak boat lifts are equipped with multiple adjustable height locking positions for variable-height parking. A convenient lock system releases all four independent safety locks simultaneously.

Heavy-Duty Aircraft Cable
Each lift is supplied with 4 high-quality stainless steel wire ropes, each of which is rated to hold 14,400 lbs.

Electric-Hydraulic Power System
We incorporate maintenance-free electric hydraulic power systems into each lift for ultimate dependability. All controls are placed close at hand.

Single Hydraulic Cylinder
Each lift is equipped with a single hydraulic cylinder, hidden away under the runway for minimum exposure and maximum performance.

Integrated Design
Lifting cables, airlines, safety latches and sheaves are all fully enclosed. This design protects all components and extends the lifespan of the lift.

Longer Approach Ramps
Low-profile, extended-length approach ramps ensure boat trailers will load onto the runways with ease.

Automatic Safety Locks
Stainless steel and aluminum pneumatic cylinders release all 4 locks simultaneously with the simple push of a button, and spring-loaded safety locks engage continuously as the lift is raised. For added safety, a secondary lock system acts as a slack-cable device for emergency protection.

Remember, dry docking is the only way to ensure that boats are safe from water-related damage. With an in-water lift, choppy waters, floods and tides can make an unexpected mess of your beautiful boat. Don't take chances! Make sure your boat is high and dry on the BendPak HD-7500 Series boat lift.

Why Should you purchase a Bend Pak lift from ASEdeals?
1) Guaranteed Lowest Prices - Listen, we monitor our competition's prices. We know we usually have the lowest price on most of our equipment most of the time. In the unlikely event you find any of our automotive lifts advertised anywhere on the web for less, just tell us where you saw them, and we'll beat them. It's that simple. Our prices will not be beaten!
2) Largest BendPak Distributor -This means that you enjoy the benefit of our size. Not only does this allow us to offer the best pricing available, If you have any warranty issues that you feel are not being addressed quickly enough, or to your satisfaction, we have the influence with the manufacturer to get your issue resolved right away.
3) Years of Experience - So many internet companies have popped up over the past few years, claiming to have all kinds of experience, and then when you dig a little deeper, you'll find out that they've only been around for a few years. We've been carrying Bend Pak equipment for over 17 years now. When you call and speak to us, you're not getting just an order taker that knows nothing about the product. We know these products better than most. Not only will get you answers to your questions, we will make sure that you get the proper lift for your application.
4) Reputation - Right along with the years of experience comes our reputation. Check out our reputation on all of the various car enthusiast forums out there, such as Garage Journal or Corvette Forum. You'll find countless satisfied customers, praising not only our prices, but also our integrity, honesty and ability to help you choose the right product for your application. And then, there's our hundreds of satisfied customer pictures and testimonials to back it up. We'll gladly put our reputation up against anybody's.

Shipping

We promise to do our best to get your order to you as soon as possible. We provide estimated shipping times on the product pages. All orders are dispatched within 1-2 business days and delivered within 5-7 business days.

Order delays have proven to be unavoidable and outside of our control. While this might be frustrating, we ask you to please be patient and understanding with us in these tough times. We thank you for your business and appreciate your patience.

Please see our Returns and Refunds Policy for more details.

Returns & Refunds

If you need to exchange your product, you may do so. You, as the customer, are responsible for any shipping costs throughout any returns and exchange processes. Due to drastically increasing LTL/freight shipping costs, any outright returns will incur a 25% cancellation fee + return shipping costs. If you are replacing the product with something else, we may be able to help you cover some of the costs depending on the product.